Indalo Man
|
You will need the following:-
|
-
Punch out a dragonfly shape in the scrap card.
-
Put the main card into the bowl and spray according to the instructions on the Memory Mist. The effect is meant to be uneven and splattered looking.
-
Spray the tag shape in the same way.
-
Mask off the front of the card leaving a small edge and spray again.
-
Place the dragonfly mask randomly on the card and spray through the shape to darken the image. (Watch point – be careful to mask off any parts of the card that you don’t want to darken.)
-
Stick the straight peel off’s around the tag and punch a hole in it to attach the ribbon.
-
Stick the Indalo Man onto the tag along with the Good Luck words.
-
Attach the tag to the front of the card at an angle with the foam pads.